SenSafe® Total Chlorine

SenSafe® Total Chlorine, Part No:480010 is designed for Total Chlorine in Water

SenSafe® Total Chlorine Water Check makes on-site and field testing quicker and easier
Easier to use.No powders, No tablets to mix No liquid spillage
Simple to use use . No technical training required
Safe to use, no hazardous chemicals

The SenSafe^® Total Chlorine Water Check test strip is a TMK (Thio-Michler’s Ketone) Colourimetric Aperture Strip designed around patented technology to meet USEPA guidelines for screening all drinking water sources. The water quality test reports accurate results from 0.02 ppm (mg/L) to 10.0 ppm (mg/L). US Patented SenSafe^™ Total Chlorine Water Check makes on-site and field testing quicker and easier than current methods available. Since there are no powders or tablets to mix, no technical training is required, no hazardous chemicals are used, and water quality test results are achieved in less than 1 minute, the SenSafe^® Total Chlorine Water Check test strip promise to revolutionize water quality testing.

Detection Ranges:

Method A: 0.0, 0.1, 0.2, 0.5, 0.8, 4.0, 10.0 ppm (mg/L)

Method B: 0.0, 0.05, 0.1, 0.15, 0.2, 0.5, 1.0 ppm (mg/L)

Name		Version
No records found

Singapore

India

Indonesia

Thailand

Brunei

Combodia

Myanmar